The First In Its Class
A TRUE DROP-IN AR-15 TRIGGER
$299.99 and FREE Shipping!
State of the art 'Hard Reset Trigger'
Designed to be a true drop-in replacement trigger for the AR-15 platform. The WOT is a hard-reset trigger that has been engineered to last and endure repetitive use.
Designed to work on all AR-15 Platforms
Reinforced with HardoxTM, the world’s most abrasion resistant steel
Works with any standard buffer (h2 recommended)
Anti-walk pins included
Patent pending- failure proof spring carrier system
Hardox™ Steel
The Wot has a patent-pending, spring-locking bar that makes the trigger unique. The trigger’s hammer is reinforced with Hardox steel, which due to its toughness, copes with shocks, jolts, bangs, ricks, and jabs day after day. The material allows the WOT to take the constant beating of the bolt carrier group (BCG) as it cycles back and forth in an AR-15 rifle or pistol.
The WOT is not capable of being a fully automatic trigger because the hammer is released by the locking bar and hits the firing pin. The firing pin then activates the primer on the brass casing which allows only one bullet to make its way out of the rifle with each pull of the trigger.
Patent-Pending Spring Carrier
The Wot has a patent-pending, spring-locking bar that makes the trigger unique. The trigger’s hammer is reinforced with Hardox steel, which due to its toughness, copes with shocks, jolts, bangs, ricks, and jabs day after day. The material allows the WOT to take the constant beating of the bolt carrier group (BCG) as it cycles back and forth in an AR-15 rifle or pistol.
The WOT is not capable of being a fully automatic trigger because the hammer is released by the locking bar and hits the firing pin. The firing pin then activates the primer on the brass casing which allows only one bullet to make its way out of the rifle with each pull of the trigger.
Easy Installation ‘True Drop In Trigger’
The trigger is designed to fit all AR-15 platforms with a full-auto bolt carrier group (not to be used in Ars using .300BLK or .308)
The WOT is easily installed without the help of a professional gunsmith (although we always recommend a gunsmith to inspect your firearm). Shooter can now experience the thrill of shooting a hard-reset trigger in the AR-15.
First, make sure your firearm is unloaded and clear. Move the magazine and ammunition away from your working area.
1. Remove the upper receiver from the lower receiver.
2. Gently allow the hammer to go forward after depressing the trigger.
3. Remove the grip from the lower receiver, along with the safety and the safety pin.
4. Remove trigger, hammer, and springs
5. Replace with the WOT (it will have a snug fit)
6. Anti-walk pins are included and should be installed on the trigger to avoid malfunctions.
7. Anti-walk pins are included and should be installed on the trigger to avoid malfunctions.
8. Reinstall the safety pin, spring, and grip.
9. Reinstall the upper receiver.